GF2000 2 Ton Crawler Dumper Air Cooled 195 Diesel Engine Front Dump Box Remote Control Ready 1500mm
2 ton air cooled crawler dumper
,front dump remote control dumper
,1500mm wide cargo box carrier
Two tonnes, no radiator, no excuses
Heat is the quiet killer of small site machinery in the tropics. Radiators clog with dust, coolant disappears, and an engine that ran perfectly in spring seizes in July. The GF2000 takes a different route: an air-cooled 195 diesel rated at 9.2 kW, with no coolant, no water pump and no radiator core to clean. Operators in dusty quarries, brick yards and dry-season plantations tell us this single decision is why they buy the machine.
A load cycle, step by step
- Approach and load. The box (1500 x 1000 x 500 mm) is fed by hand, by a small excavator bucket or by a chute. Removable side gates come off in seconds when you need to drop in logs, timber or long pallets.
- Haul. Three forward gears and one reverse, 1-15 km/h, with an extended chassis that keeps the track footprint long and the ride stable even with a heaped load.
- Position. Pull-rod steering gives a tight turning circle, so the machine can be squared up to a spoil heap or a truck bed in one movement.
- Front dump. The box tips forward, ahead of the operator, which lets the machine reverse into a tipper truck or over a wall and unload without turning around. This matters on embankments and canal banks where turning space does not exist.
- Return empty at speed. Third gear and low weight (720 kg) make the empty return quick, keeping the cycle time short.
Remote control: for the places people should not stand
Where the machine works under a conveyor, inside a poultry shed with low headroom, or on the edge of a slurry pit, an optional remote control lets one operator walk beside the load and steer from a safe distance. The same option is popular with rental fleets, because a single operator can run two units.
Why the front-dump layout suits embankment work
| Situation | Benefit of front tipping |
|---|---|
| Canal and ditch banks | Unload over the edge without reversing to the lip |
| Loading into a truck bed | Drive tail-first, tip forward, no three-point turn |
| Backfilling trenches | Place material precisely along a narrow strip |
| Confined yards | No need to swing the machine around after tipping |
Technical parameters
| Parameter | Value |
|---|---|
| Overall size | 2490 x 1000 x 1250 mm |
| Cargo box size | 1500 x 1000 x 500 mm |
| Rated load | 2000 kg |
| Machine weight | 720 kg |
| Engine | Air-cooled 195 diesel, 9.2 kW |
| Gearbox | 18 type, 3 forward + 1 reverse |
| Rubber track | 230 x 72 x 49 |
| Travel speed | 1-15 km/h |
| Unloading | Front dump |
| Suspension | Pull rod |
| Climbing ability | 40 degrees |
| Box ground clearance | 480 mm |
Service calendar
| Interval | Action |
|---|---|
| Daily | Blow dust from cooling fins, check track tension, inspect hydraulic hose ends |
| 50 hours | Engine oil change, gearbox oil level, lubricate steering joints |
| 200 hours | Hydraulic oil and filter, track pin wear check, brake adjustment |
| Seasonal | Replace worn track shoes, repaint box interior, torque frame bolts |
Tell us your ground conditions and whether you need remote control — we will confirm configuration, price and shipping in one reply.
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.