GF3500 3.5 Ton Crawler Dumper CF1130M 20.1kW Engine 2050x1600mm Tipping Box Track Carrier 35 Degree
3.5 ton crawler carrier
,CF1130M engine track dumper
,tipping self unloading cargo box
The payload step that pays for itself
Every hauling job has a break-even point where the extra capital cost of a bigger machine disappears inside one season. For most plantation and construction customers the GF3500 is that machine. Against a 1.5 tonne dumper it carries 2.3 times the load per trip while burning a similar amount of fuel, so the arithmetic is simple: fewer trips, fewer track hours, fewer operator hours, same tonnage delivered.
Feature breakdown
- Payload 3500 kg / box 2050 x 1600 x 500 mm. A heaped box holds roughly 1.6 m3 of loose material — a full excavator bucket load without spillage.
- CF1130M engine, 20.1 kW. Water-cooled, four-cylinder smoothness with enough reserve to climb a 35 degree grade fully loaded.
- 21-type gearbox, 3 + 1 with high/low range. Six working speeds in practice: a crawl for placing loads, a mid range for hauling and a fast range for empty returns.
- 400 x 90 x 56 tracks. Wide enough to float over soft ground, deep enough to bite on wet clay.
- 720 mm ground clearance. Crosses ridge rows, kerbs and rubble without the belly dragging.
- Pull cable clutch and parking brake. Mechanical, serviceable and predictable on slopes.
- Tipping self-unloading. Raised ram empties the box from the seat in seconds.
Full specification
| Parameter | GF3500 |
|---|---|
| Overall dimensions | 3140 x 1650 x 1550 mm |
| Cargo box | 2050 x 1600 x 500 mm |
| Rated load | 3500 kg |
| Machine weight | 1500 kg |
| Engine | CF1130M, 20.1 kW diesel |
| Gearbox | 21 type, 3 + 1 high/low |
| Rubber track | 400 x 90 x 56 |
| Travel speed | 1-15 km/h |
| Unloading system | Tipping self-unloading |
| Clutch | Pull cable |
| Climbing ability | 35 degrees |
| Ground clearance | 720 mm |
Cost per tonne, roughly
Take a farm that moves 90 t of fresh fruit bunches a day along 400 m of soft track. A 1.5 tonne machine needs 60 loaded trips; the GF3500 needs 26. At the same fuel burn per hour and a similar cycle speed, the larger machine completes the shift in about half the running hours. Over a 250-day year that difference is measured in thousands of litres of diesel and hundreds of hours of track wear — usually more than the price gap between the two models.
Applications in practice
| Oil palm & rubber estates | Bunch and cup lump collection along plantation roads that turn to slurry in the wet season. |
| Sand and gravel pits | Short-haul from the face to the stockpile or the washing plant. |
| Brick and block yards | Raw clay in, finished pallets out, without rutting the yard. |
| Earthworks | Cut and fill on house plots where a tipper cannot reach. |
| Landfill and compost sites | Moving wet, heavy material that defeats wheeled loaders. |
What we include
Each unit ships with a tool kit, an English operation and parts manual, and a spare set of track pins. Optional factory fittings include a canopy, LED work lamps, a hydraulic winch, side extension boards and a turf track pattern for finished surfaces.
Share your daily tonnage and haul distance and we will model whether the GF3500 or the larger GF5000 series is the better investment, then send a full quotation.
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.