CL100 10 Ton Full Rotating Crawler Dumper 228kW Engine 30 Degree Dump 3630x2780mm Rock Body
10 ton full rotating dumper
,228kW heavy crawler carrier
,all round dumping track machine
A haul truck built on tracks, with a body that turns
The CL100 is the largest machine in this crawler dumper family and the only one that rotates. Instead of forcing the chassis to swing around at the dump point — which is what costs time on a narrow bench — the upper structure turns so the load is discharged in any direction while the undercarriage stays put. That single design decision changes how a haul cycle is planned.
1. The rotating upper structure
A conventional dumper must be reversed into position at the tip head, tipped, then driven out. On a bench only ten metres wide, or beside a hopper where space is tight, that manoeuvre is the slowest part of the cycle. With the CL100 the operator drives straight in, rotates the body and dumps at up to 30 degrees all round. There is no need to turn the chassis frequently, so cycle times shorten and track wear at the slew point falls.
2. The power package
At the heart of the machine sits a D6R330-35CR engine rated at 228 kW, matched to a hydraulic motor drive system. That is not a scaled-up farm engine; it is industrial power aimed at sustained heavy-load hauling on grades, with the torque reserve needed to keep a ten-tonne load moving when the track digs into loose ground.
3. The undercarriage
| Item | Data |
|---|---|
| Rubber track | 700 x 100 x 99 mm |
| Ground pressure (empty) | 35.4 kPa |
| Track pitch | 2080 mm |
| Chassis height | 1140 mm |
| Minimum ground clearance | 680 mm |
| Steering mode | Hydraulic motor drive |
A 700 mm wide track with a 100 mm lug pattern and 99 links spreads the 15,000 kg machine weight to an empty ground pressure of just 35.4 kPa. For comparison, a loaded wheeled truck of similar payload can exceed three times that figure. The practical consequence is that the CL100 keeps moving across ground where a conventional tipper would sink to the axles, and it does so without cutting the deep ruts that later need repairing.
4. Controls and cab
The machine uses a pilot control system: light lever movements translate into precise hydraulic response, which matters when placing a ten-tonne load beside a trench or over a wall. The engineering cab carries a suspended shock-absorbing seat and a multi-function display for real-time monitoring of machine condition, so the operator can watch temperatures and pressures instead of guessing. All-metal body panels and a reinforced chassis are there for the same reason: this class of machine is expected to work for a decade, not a season.
5. Complete specification
| Parameter | Value |
|---|---|
| Length x Width x Height | 5800 x 2780 x 3000 mm |
| Max payload | 10000 kg |
| Machine weight | 15000 kg |
| Cargo box size | 3630 x 2780 x 710 mm |
| Engine | D6R330-35CR, 228 kW |
| Travel speed | 1-15 km/h |
| Rubber track | 700 x 100 x 99 mm |
| Ground pressure empty | 35.4 kPa |
| Track pitch | 2080 mm |
| Steering | Hydraulic motor drive |
| Chassis height | 1140 mm |
| Min ground clearance | 680 mm |
| Dumping | 30 degrees all-round, rotating body |
6. Where this machine belongs
Large earthworks with tight bench geometry, quarries and aggregate yards, mine site rehabilitation, major infrastructure fills, tunnel spoil handling and industrial sites where a wheeled truck cannot operate. If your site plan currently depends on a wheeled tipper plus a dozer to keep the haul road passable, the CL100 removes one of those machines from the equation.
7. Before you order
Confirm three things: the maximum gradient on your haul, the narrowest point on the route (the machine is 2780 mm wide), and whether the rotating body needs to discharge over a hopper lip or a stockpile crest, since discharge height affects the body specification. We can supply drawings for site planning and a container loading plan for flat-rack shipment.
Send your site drawings and operating hours per day — our engineering team will confirm the configuration and issue a detailed quotation.
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.