Wide Body 23 Seat Enclosed Electric Sightseeing Bus 6220mm 20kW Motor 19.2kWh Battery Theme Park People Mover
Wide Body 23 Seat Electric Bus
,6220mm Theme Park People Mover
,20kW 19.2kWh Enclosed Shuttle
LAKER AUTO BS148A/D23F — 23-Seat Wide-Body Enclosed Electric Sightseeing Bus (6220 mm)
High-traffic attractions live and die by guest flow. The LAKER AUTO BS148A/D23F is the range flagship: a 6220 mm enclosed coach on a wide 1850 mm body carrying 23 passengers, with a 20 kW AC drive and a 19.2 kWh battery rated for 90 km.
When a theme park, expo ground or large resort needs to move people in volume without running a fleet of small carts, this is the vehicle that does the heavy lifting quietly and cleanly.
A 23-seat people mover for high-traffic attractions
Volume is the point. Each D23F departure clears roughly three times the passengers of an 8-seat cart, so queue lengths fall and headways loosen. The wide body also means wider aisles and faster boarding — the two things that actually shorten a line.

| Seats | 23 — flagship capacity per departure |
| Body | 6220 mm long * 1850 mm wide — wide-body, wide aisles |
| Motor | 20 kW AC — strongest in the range for full loads and grades |
| Battery / range | 19.2 kWh / 90 km — sustained high-throughput operation |
| Min. turning radius | <=7.5 m — surprising agility for its size |
The 20 kW motor and 19.2 kWh battery advantage
A vehicle this size has to move a lot of mass all day. The 20 kW AC motor gives the D23F the torque to pull 23 passengers up ramps without straining, and the 19.2 kWh battery is sized so the coach keeps pace with a busy attraction timetable instead of waiting at a charger.
Wide 1850 mm body, wider aisles
The extra body width is not cosmetic — it buys passenger aisle space, elbow room and quicker alighting. Combined with grab handles, well-lit steps and a non-slip patterned aluminium floor, it keeps boarding and exit safe at turnover peaks.
- Wide-body cabin with panoramic glass for a bright, spacious feel.
- PU ergonomic curved anti-slip seating throughout.
- PT+PBT alloy front cover and shark-nose lighting on an enhanced composite roof.
- High-strength steel frame with electrophoresis plus powder coating anti-rust finish.
Guest flow: boarding and alighting efficiency
Throughput depends on how fast guests get on and off. The D23F pairs a wide single or double step arrangement with wide aisles and clear grab points, so groups clear the vehicle in seconds — critical when a shuttle departs every few minutes.
Fleet customization for theme parks
| Livery | Park branding, character wraps and route colours applied at the factory |
| Seating | Standard PU or premium trim, colour matched to the park |
| Power | Standard or lithium battery; fast-charge and 110V/220V charger options |
| Add-ons | PA/announcement, USB charging, LED night lighting, luggage racks |
| Shipping | Mix D23F units with other LAKER AUTO models in one container |
Specification sheet
| Model Number | BS148A/D23F |
| Passenger Capacity | 23 seats |
| Overall Dimension (L * W * H) | 6220 * 1850 * 2270 mm |
| Wheelbase | 3700 mm |
| Kerb Weight | 2050 kg |
| Max. Speed | <=30 km/h |
| Motor | 20 kW AC |
| Battery Capacity | 19.2 kWh |
| Driving Range (Standard Battery) | 90 km |
| Braking Distance | <=5 m |
| Min. Turning Radius | <=7.5 m |
| Min. Ground Clearance | 140 mm |
| Climbing Ability (Loaded) | <=15% |
| Brake System | Front ventilated disc + rear drum hydraulic dual-circuit brakes, parking handbrake, vacuum-assisted brake system |
| Suspension | MacPherson independent suspension front axle, integral rear axle |
| Body Frame | High-strength steel structural frame longitudinal beams, electrophoresis + powder coating anti-rust |
Scaling guest transport for a theme park, expo or large resort? Get a quote from LAKER AUTO for the BS148A/D23F and discuss fleet sizing and lead times.
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.