CL30V 3 Ton Diesel Crawler Dumper 22HP RD220N Engine 2200x1300mm Engineering Cargo Box 40 Degree Climb
3 ton diesel crawler dumper
,22HP RD220N track carrier
,engineering cargo box dumper
An engineering chassis dressed as a farm dumper
Look closely at the CL30V and you notice the details are not borrowed from a wheelbarrow with tracks bolted on. The carriage is a fabricated 2200 x 1300 x 500 mm engineering box rated for three tonnes. The tracks are 400 mm wide engineering pattern with 90 mm pitch, running on a proper roller frame with guide wheels, support rollers and a 590 mm ground clearance figure that keeps the belly clear of rocks and stubble. This is the machine that moves concrete aggregate, crushed stone, bricks and wet clay on sites where a tipper truck cannot enter.
Why the crawler layout outperforms wheels here
Rubber tracks and a roller system replace the conventional wheeled chassis for one reason: contact area. Spreading three tonnes across a long track footprint reduces ground pressure to the point where the CL30V crosses a paddy field, a swamp edge, a muddy farm road, rough mountain track, soft grassland, woodland floor, desert sand, and ice or snow without cutting a rut. The same property gives it grip that wheels cannot match on a 40 degree slope, and it keeps the noise down compared with steel tracks — important when working near livestock or housing.
Three transmission choices, three kinds of buyer
| Version | How it drives | Best for |
|---|---|---|
| Manual | Mechanical gear selection, direct clutch operation | Owners who repair everything themselves and want the simplest possible drivetrain |
| Semi-automatic | Hydraulic steering assist with gear selection, less operator effort per shift | Long shifts on mixed terrain where fatigue causes mistakes |
| Fully automatic | Gearbox-free hydrostatic drive, single lever for speed and direction | Rental fleets and sites where several different operators share one machine |
Where the three tonnes go to work
- Water conservancy projects — moving clay and stone along canal banks and embankment crests.
- High-standard farmland renovation — stripping topsoil, shifting subsoil, backfilling field edges.
- Mining and quarry sites — short-haul ore and overburden movement on benches.
- Infrastructure works — pipe bedding, road sub-base and kerb stone delivery to the trench edge.
- Orchards and forest yards — timber, prunings and harvest crates out of the rows.
Detailed specification
| Model | CL30V |
|---|---|
| Engine | Diesel, model RD220N (alternative engines available on request) |
| Engine power | 22HP at 2400 RPM |
| Self weight | 1600 kg |
| Max payload | 3 ton |
| Overall size | 3400 x 1400 x 1880 mm |
| Carriage size | 2200 x 1300 x 500 mm |
| Max climbing angle | 40 degrees |
| Min ground clearance | 590 mm |
| Walking speed | 1-15 km/h |
| Track specification | 400 x 90 x 51 |
| Steering | Steering control valve |
| Gear position | 1-2-3 + R with high/low range |
Configuration notes before you order
The engineering track pattern is the standard fitment because it survives stone and broken concrete. If the machine will spend most of its life on turf, sealed yards or finished landscape, ask for the turf pattern instead — it is a straight swap at build time. Cab or canopy, LED work lights, a hydraulic winch and a container-style side-tipping body are all available as factory options.
Send your site conditions and required tonnage per shift — we will confirm the right transmission version and issue a full quotation with freight.
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.