CL50V 5 Ton Crawler Dumper YN27 42kW Engine Integrated Winch Flipping Self Unloading 2300mm Box
5 ton crawler dumper with winch
,flipping self unloading cargo box
,YN27 42kW track transporter
Questions buyers ask before ordering a CL50V
Every enquiry we receive about a five-tonne crawler dumper ends up covering the same half-dozen points. Here are the answers, in the order they usually come up.
Does a winch really belong on a dumper?
In a word, yes — but not for the reason most people think. The integrated winch is not there to recover broken trucks. It is there for the two or three times a month when a load will not go where it needs to: a log jammed in a gully, a loaded trailer bogged at the field edge, a bundle of timber too long for the box. A 42 kW engine with a winch drum converts the machine into a recovery tool, and sites that own one stop calling in a tractor.
What does "flipping self-dumping" mean in practice?
The box is lifted and pivoted by a hydraulic ram so the load rolls out of the rear of the bed. Compared with a simple vertical tip, the flipping arc clears sticky material — wet clay, damp compost, palm fruit — that would otherwise cling to the floor and need shovelling. One lever from the operator's seat empties 2300 x 1600 x 500 mm of material in seconds.
Can it handle a rough mountain track with five tonnes onboard?
That is the design case. The combination of 400 x 90 x 62 rubber tracks, a 35 degree climbing limit and the 3+1 gearbox with high and low range gives six effective working speeds. Low-low is a crawl for placing a load on a slope, and it holds position on the gradient without the operator riding the brakes.
How much room does it need to turn?
At 1650 mm wide and 3510 mm long, the CL50V needs roughly a 6 m wide track to turn around in one movement. Where space is tighter, three-point turns work because hydraulic steering allows full lock at low speed without stalling.
Will it damage the ground?
Rubber tracks distribute the loaded weight over a long contact patch, so pressure per square centimetre stays well below that of a wheeled truck of the same payload. On pasture, grassland and sealed yards the surface recovers. On wet clay the tracks will leave a pattern, as any loaded machine will, but they will not cut deep ruts.
What are the numbers?
| Parameter | CL50V |
|---|---|
| Length x Width x Height | 3510 x 1650 x 1550 mm |
| Cargo box | 2300 x 1600 x 500 mm |
| Rated load / machine weight | 5000 kg / 2000 kg |
| Engine | YN27, 42 kW diesel, electric start |
| Transmission | 28 model, 3 + 1 with high/low range |
| Rubber track | 400 x 90 x 62 |
| Travel speed | 1-15 km/h |
| Unloading | Flipping self-dumping, hydraulic |
| Integrated equipment | Winch |
| Climbing ability | 35 degrees |
| Box ground clearance | 700 mm |
| Steering | Hydraulic |
Which jobs does it fit best?
Agroforestry transport, yard handling, water conservancy, high-standard farmland works and mining benches — anywhere the haul is short, the ground is soft and the load is heavy. Sand, bricks, timber, ore, fertiliser and harvested crop all travel comfortably in this box.
What should I compare before buying?
Compare the winch (not every competitor offers an integrated one), the box floor thickness, the track brand and the availability of a local service agent. Ask for the hydraulic schematic and the parts list with the quotation; any serious manufacturer will provide both.
Request the full specification sheet, option list and container loading plan — our export desk answers enquiries within 24 hours.
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.